V-Ray for 3ds max Wood Floor Material

Software:
3ds max 2019 | V-Ray Next

An example of varnished wood floor material in V-Ray and 3ds max.
The material uses a VRayBlendMtl with 2 connected VRayMtl sub materials to simulate a natural wood base layer coated by a glossy varnish layer.

51026299_2476404122388912_8157106964938096640_o

Explanation of the material node graph:50770279_2476404922388832_853261524695777280_o.jpg

  1. The wood color (Diffuse texture)
  2. The wood black and white detail texture (used to add reflection detail)
  3. The wood bump texture (actually the same as the reflection texture just color corrected to whiten most details except the lines separating the wood planks)
  4. The reflection texture is color corrected to to intensify it prior to it being connected to the base wood layer material:
    Untitled-1
  5. The reflection texture is color corrected to to decrease its intensity prior to it being connected to the varnish coat blend:
    Untitled-1
  6. The base layer natural wood material with the Diffuse, Reflect and Bump textures connected to it:
    Untitled-2.jpg
  7. The varnish coat material with the Bump texture connected to it:
    * Note the Fresnel Reflections is turned off because the Fresnel reflection is calculated by the Falloff map (8)
    Untitled-2.jpg
  8. The Falloff map that defines the amount with which the varnish coat material covers the base wood material,
    A combination of Fresnel reflection intensity/Angle with the pre-processed reflection detail map (5):
    Untitled-3.jpg
  9. The final VRayBlendMtl combining the base wood material with the varnish coat material using the Fresnel Falloff blend map:
    Untitled-1.jpg

 

Related posts:

  1. Fresnel Reflections
Advertisements

Simple Snow Material in VRay for 3ds max

Software:
3ds max 2019 | V-Ray Next

A simple way to create a snow material in V-Ray for 3ds max is to combine a VRayFastSSS2 material with a VRayFlakesMtl using a VRayBlendMtl.
The VRayFastSSS2 creates the soft translucent shading for the snow, and the VRayFlakesMtls adds sparkling highlights.

  • Note that depending on the scene and view scale,
    The VRayFlakesMtls ‘flake glossiness’, ‘flake density’ and ‘flake size’ have to be tweaked to achieve the wanted result.

Untitled-1

Untitled-2

Untitled-3

3ds max Island / Seashore opacity underwater tip

Software:
3ds max 2016

When creating a surface submerged in sea water,
Theoretically, it’s the Volume Absorption or ‘Fog‘ of the water shader that should do cause the surface to disappear under water.
But in many cases that doesn’t work well because we don’t actually model enough extended surface under the water for it to completely disappear without seeing the surfaces geometric edges that spoil the result.

One of the oldest tricks in the book is to use a Gradient Ramp map in the surface’s Opacity channel to make it gradually disappear before the geometry ends.

This can be done in most  3d software and render engines, I’m demonstrating it here using 3ds max and V-Ray:

Island

 

V-Ray – Underwater rendering tip

Software:
3ds max 2019 | V-Ray Next

I decided to do some test renders for an underwater swimming pool scene with 3ds max and V-Ray,
And happily found out that my initial geeky academic approach to the subject was actually outdated and unnecessary.
> look down at the bottom for the correct sample renders.

In this example there is a VRaySun & VRaySky for the daylight render setup and a Caustics calculation to create the light lensing effects on the under water surfaces.

The wrong way:
Having ancient habits in the subject,
I first flipped the water\air surface’s normals so they’ll point down into the water (towards the camera), And set the water material’s IOR to 0.75 ( 1 / 1.333 ) so instead of being an “air to water” material, it will become a “water to air” material.
This produced a non realistic result.
Viewed from underwater, the air surface should have a very dominant mirror reflection at most angles.Untitled-1.jpg

 

The Correct Way:
It seems that in V-Ray nothing special should be setup in terms of the water material.
You don’t have to create a special water-to-air material like I thought at first.
Its a regular water material, and the water surface is facing upwards like it should,
And when the camera is underwater it renders the water surface correctly as an air surface from withing the water.

The pool water material setup:
Note that Affect Shadows is turned off so the surface will generate caustics and not fake transparent shadows, and that Reflect on back side is turned on to produce more detailed reflections.
mat.jpg

This produced the following result in which the reflection/refraction look correct but the water is still too simple:Untitled-2.jpg

Improved wave deformation for the water surface, added detail using a Noise bump in the water material and a sense of depth with Volumetric Fog:Untitled-4.jpg

Finally remembered to activate Reflect on back side at the water material to add more realistic reflection detail, some basic contrast in the V-Ray VFB,
And a shark because I couldn’t help it…. 😀
Untitled-6.jpg

V-Ray Next’s PBR’ness

Software:
3ds max 2019 | V-Ray Next

A quick test of V-Ray Next‘s PBR workflow,
Namely designing materials while previewing them using V-Ray,
Defining the material properties using the new (to V-Ray) Metalness attribute, and using Roughness rather than Glossiness, shows good results IMO.

Results are generally consistent through Blender & Cycles, Maya & Arnold, and UE4.

Untitled-1.jpgUntitled-3

Untitled-4

Untitled-2

 

Related Posts:

  1. V-Ray Next – Metalness
  2. Metal In UE4
  3. Fresnel Reflections

VRayMtl’s new metallic goodness

Software:
3ds max 2019 | V-Ray Next | V-Ray next GPU

In V-Ray Next (4) for 3ds max, a new Metalness parameter has been added to the Reflect parameters of the VRayMtl material.
This allows for easy creation of realistic metal materials and also effectively enables a PBR workflow with V-Ray.

When the Metalness parameter is set to 1.0, the material becomes completely reflective, the Diffuse color controls the general reflection color, and the Reflect color (which should generally be set to white) controls the reflection color at grazing incidence angle.

The IOR parameter still controls how fast will the main reflection color (set by the Diffuse color) blend into the Reflection color, and I don’t know whether some form of complex Fresnel has been implemented or if it’s just a dielectric simple Fresnel blended over a reflective surface.

An excellent article on the new Feature from the Chaos Group blog:
https://www.chaosgroup.com/blog/understanding-metalness

VRay_Next_Metalness

Related:

  1. Fresnel Reflections
  2. Complex Fresnel for Blender & Cycles
  3. Metal material in UE4